Loading...
Loading...
Climate models, weather data, oceanography, hydrology, atmospheric science, environmental monitoring
27,187 datasets
Approximately 1.4 million gravity stations from the Australian National Gravity Database, supplemented by offshore data, were used to generate this grid. The data represents the half vertical derivative of de-trended global isostatic residual anomalies over Australia and its continental margins, with a cell size of approximately 435 meters. Geoscience Australia compiled the data from ground observations collected by various government and research entities from the 1940s onward, combined with global marine gravity data.
Wind data collected by weather sensors deployed at the AIMS Wharf Weather Station site. The dataset covers a specific seven-month period from 01 November 1983 to 30 May 1984. It was aggregated by the Australian Ocean Data Network and last updated in April 2026.
Geoscience Australia Data produced the National Gravity Compilation 2019 DGIR image from the 2019 Australian National Gravity Grids A series. The image shows de-trended global isostatic residual gravity anomalies over Australia and its continental margins, derived from nearly 1.4 million gravity stations and marine data. The underlying ground observations were collected by various government, industry, and research entities from the 1940s to 2019.
Australia and its continental margins are covered by this gravity grid with a cell size of approximately 435 meters. The grid is derived from nearly 1.4 million gravity stations in the Australian National Gravity Database as of September 2019, supplemented by offshore data. Geoscience Australia produced this de-trended global isostatic residual anomaly grid from ground observations collected from the 1940s onward.
A gravity anomaly grid for Australia and its continental margins, derived from nearly 1.8 million ground and airborne observations. The grid, with a cell size of approximately 435 meters, shows the half vertical derivative of de-trended global isostatic residual anomalies. It was compiled by Geoscience Australia using data from the Australian National Gravity Database and global sources, incorporating measurements from the 1940s to 2019.
Nearly 1.8 million gravity observations, including ground stations and airborne surveys totaling 451,000 line km, were used to create this 2019 gravity anomaly grid. Geoscience Australia processed and quality-checked the data, which measures subsurface rock density variations in units of micro-meters per second squared. The final image has a cell resolution of approximately 435 meters and covers Australia and its continental margins.
A 200-station network across the continental United States, Alaska, and Puerto Rico collects weekly precipitation samples for chemical analysis. The National Atmospheric Deposition Program established the network in 1978 to monitor acidic chemical deposition. Samples are analyzed for ions including hydrogen (pH), ammonium, calcium, sulfate, nitrate, chloride, and orthophosphate.
MYD16A2 Version 6.1 provides global 500-meter resolution estimates of evapotranspiration and latent heat flux as 8-day composites. The dataset is produced by LPCLOUD using an algorithm based on the Penman-Monteith equation, incorporating MODIS remote sensing data and meteorological reanalysis. Each composite period sums evapotranspiration values and averages latent heat flux values over eight days.
Global atmospheric reanalysis data providing monthly diurnal means of surface flux diagnostics from 1980 to present. NASA's Global Modeling and Assimilation Office produced this dataset using the Goddard Earth Observing System Model version 5.12.4. The collection includes hourly time-stamped means for variables like total precipitation and surface air temperature.
MERRA-2 provides global atmospheric reanalysis data from 1980 to the present, with a latency of approximately three weeks. This collection contains monthly mean, time-averaged land surface forcing parameters, including bias-corrected precipitation and surface radiation. The data is produced by NASA's Global Modeling and Assimilation Office using the GEOS model version 5.12.4.
MERRA-2 provides a global atmospheric reanalysis from 1980 to the present, updated with a latency of about three weeks. NASA's Global Modeling and Assimilation Office produced this monthly mean collection of assimilated surface flux diagnostics, including total precipitation and surface air temperature. The data represents conditions at the model surface layer, approximately 60 meters above ground.
GHRSST L3C NOAA/ACSPO Himawari-09 AHI v2.90 dataset provides subskin sea surface temperature measurements from the Japanese Himawari-9 geostationary satellite. Data is gridded at 0.02-degree resolution with 24 hourly files produced daily, totaling approximately 0.7 GB per day. The product is generated by the NOAA ACSPO system from the Advanced Himawari Imager instrument and is validated against in situ data.
Nearly 1.4 million gravity stations from the Australian National Gravity Database, supplemented by offshore data, were used to generate this grid. The data, acquired from the 1940s to 2019, were processed by Geoscience Australia to produce a half vertical derivative of de-trended global isostatic residual anomalies. The resulting grid has a cell size of 0.00417 degrees, approximately 435 meters, covering Australia and its continental margins.
Nearly 1.4 million gravity stations from the Australian National Gravity Database, supplemented by global marine data, were used to create this 2019 grid. Geoscience Australia produced this image showing the first vertical derivative of de-trended global isostatic residual anomalies over Australia and its continental margins. The underlying gravity observations were collected by government, industry, and research bodies from the 1940s to 2019, with ground station spacing varying from 11 km to less than 1 km.
A geospatial grid showing the first vertical derivative of de-trended global isostatic residual gravity anomalies across Australia and its continental margins. The grid is derived from nearly 1.4 million gravity stations from the Australian National Gravity Database and offshore sources, with a cell size of approximately 435 meters. Geoscience Australia produced this compilation, incorporating ground observations collected from the 1940s to September 2019.
A gravity anomaly grid for Australia and its continental margins, derived from approximately 1.8 million ground, airborne, and offshore gravity observations. The grid has a cell size of 0.00417 degrees (approximately 435m) and incorporates data from the 1940s to September 2019. Geoscience Australia processed and quality-checked the data, which includes nearly 1.4 million ground stations, 345,000 line km of airborne gravity, and 106,000 line km of airborne gravity gradiometry.
Approximately 1.8 million gravity observations, including nearly 1.4 million ground stations and over 450,000 line km of airborne surveys, were used to generate this grid. The dataset is a processed image showing the half vertical derivative of de-trended global isostatic residual (DGIR) gravity anomalies over Australia and its continental margins, produced by Geoscience Australia from the 2019 Australian National Gravity Grids B series. Data was compiled from ground observations, offshore global grids, and airborne surveys conducted by various government, industry, and research entities from the 1940s to 2019.
Nearly 1.4 million ground gravity stations, 345,000 line km of airborne gravity data, and 106,000 line km of gravity gradiometry data were combined to create this free air anomaly grid. The grid, with a cell size of approximately 435 meters, reveals geological structures beneath Australia and its continental margins. Geoscience Australia compiled this dataset from observations dating from the 1940s to 2019, supplemented with global offshore data.
Weekly balloon-borne ozonesonde flights at Davis Station, Antarctica have collected vertical ozone profiles since 2003. The program, operated by the Australian Antarctic Division with Chinese and Australian meteorological partners, provides data with approximately 50-meter vertical resolution. Measurements include ozone partial pressure, temperature, humidity, wind speed, and geopotential height.
Approximately 1.8 million gravity observations, including nearly 1.4 million ground stations, were used to generate this grid. The image shows the first vertical derivative of the complete Bouguer anomalies over Australia and its continental margins, derived from the 2019 Australian National Gravity Grids. Data were compiled by Geoscience Australia from Commonwealth, State, Territory, industry, and academic sources, with observations dating from the 1940s to 2019.