A novel electroplated magnetic grinding tool for magnetically driven internal finishing of

Experimental data on a novel electroplated magnetic grinding tool for internal finishing of laser powder bed fusion (PBF-LB) Ti-6Al-4V tubes. The dataset, authored by Shuangju Shao and last updated in June 2026, likely contains results on surface roughness reduction, material removal rates, and tool durability over extended polishing periods. It demonstrates a surface roughness improvement of approximately 80% and stable polishing for 360 minutes.

Use Cases

• Benchmarking surface finishing techniques for additively manufactured titanium components based on reported surface roughness reduction.
• Modeling tool wear and material removal efficiency in magnetic abrasive finishing processes based on the 360-minute stability claim.
• Optimizing post-processing parameters for complex internal channels in additive manufacturing based on the geometry-adaptive strategy described.
• Comparing the performance of electroplated superabrasive tools against conventional methods for difficult-to-access cavities.

Strengths

• Reports specific quantitative results, including a surface roughness reduction from >7 μm Ra to 1.2–1.4 μm Ra.
• Includes performance metrics such as a material removal rate of 4–5 mg/min (38–40 μm/min in depth) and stable operation for 360 minutes.
• Demonstrates applicability to complex tube geometries (straight, curved, diameter-varying) as mentioned in the highlights.

Limitations

• Column-level documentation is absent; field semantics must be inferred after download.
• Row count is unknown, which may limit suitability assessment for large-scale analysis.
• The dataset size is 106.8 MB, but the specific data structure and file contents are not detailed.

Provenance

Source

figshare, author Shuangju Shao.

Collection Method

Likely generated from laboratory experiments on magnetically driven internal finishing (MDIF).

Freshness

Last updated 2026-06-01 19:52:41; freshness should be verified.