Experimental Flowable Resin Composites Wear Data by Filler Size and Loading

Experimental data from a study investigating the effect of filler size and loading on the wear of flowable resin composites. The dataset likely contains volumetric wear loss measurements for nine composite formulations, tested across 40,000 cycles using a cyclic loading device. The research was authored by Koichi Shinkai and published via the paperswithcode platform.

Use Cases

• Modeling the relationship between filler size and material wear based on the described experimental parameters.
• Comparing the wear resistance of different composite formulations based on the reported filler size and loading levels.
• Analyzing the statistical significance of filler properties on wear volume using the ANOVA and Tukey test results described.

Strengths

• Data is derived from a controlled experiment with five replicates (n=5) per condition.
• Wear was evaluated at four specific intervals: 10,000, 20,000, 30,000, and 40,000 cycles.
• Nine distinct experimental material formulations were tested, varying filler size (70, 200, 400 nm) and loading (50, 55, 60 wt%).

Limitations

• Column-level documentation is absent; field semantics must be inferred after download.
• Row count is unknown, which may limit suitability assessment.
• Last update date is unknown; freshness unverified.

Provenance

Source

paperswithcode

Collection Method

In vitro two-body wear test using a cyclic loading device and a computer-controlled three-dimensional measuring microscope.