Wood Bonding Strength Data for Beech, Fir, and Larch Under Different Surface Treatments

Face milling with a rounded cutting edge yielded significantly higher tensile shear strengths across three wood species and two adhesives. The dataset contains results from a study on the influence of mechanical surface preparation on bonding quality for European beech, Douglas fir, and larch. It was authored by Arkadiusz Bernaczyk and last updated in May 2026.

Use Cases

• Compare tensile shear strength results based on wood species (European beech, Douglas fir, European larch).
• Evaluate adhesive performance based on adhesive type (phenol-resorcinol-formaldehyde vs. one-component polyurethane).
• Analyze the effect of surface treatment method (planing, sanding, fining, face milling) on bond quality.
• Correlate surface topography from SEM analysis with mechanical test results.
• Assess bond durability based on storage condition sequences (A1, A4, A5).

Strengths

• Includes results for three distinct wood species and two adhesive types, enabling comparative analysis.
• Tests multiple mechanical surface preparation methods, including a novel face milling process.
• Assesses bond strength under three different storage condition sequences (A1, A4, A5) per EN 302-1 standard.

Limitations

• Row count is unknown, which may limit suitability assessment.
• Column-level documentation is absent; field semantics must be inferred after download.
• The dataset is small (216.3 KB), indicating a limited scope likely focused on experimental results.

Provenance

Source

figshare

Collection Method

Experimental study involving mechanical testing and SEM analysis.

Freshness

Last updated 2026-05-13 09:40:56; freshness should be verified.