A dataset likely contains electrical impedance measurements for monitoring corrosion in bonded aluminum-aluminum joints. The adhesive was modified with a carbon nanotube dispersion to create an electrical percolation network. The data was generated by Xoan Xosé Fernández Sánchez-Romate and last updated on 2026-06-21.
Use Cases
- Modeling corrosion progression based on electrical impedance spectroscopy (EIS) data.
- Training predictive models for material degradation using resistance-capacitance (RC) and inductance-resistance-capacitance (LRC) circuit parameters.
- Analyzing the effect of carbon nanotube doping on the electrical response of adhesives under corrosive conditions.
- Validating in-situ monitoring techniques for complex structural elements like bonded joints.
Strengths
- Focuses on a novel in-situ monitoring technique for a specific corrosion process.
- Describes a clear experimental setup involving immersion in a 3.5 wt% NaCl solution.
- Proposes specific electrical models (RC, LRC, CPE) correlated with corrosion stages.
Limitations
- Column-level documentation is absent; field semantics must be inferred after download.
- Row count is unknown, which may limit suitability assessment.
- Freshness should be verified as the last update date is in the future (2026-06-21).
Provenance
- Source
- e-cienciaDatos Harvested Dataverse
- Collection Method
- Experimental measurements from a study on corrosion in bonded Al-Al joints.
- Freshness
- Last updated 2026-06-21 04:10:10