Mesh Sensitivity Parameters for Y. yukonensis Spine Models

Mesh sensitivity parameters for computational fluid dynamics simulations of Y. yukonensis spine models. The data was generated by Zaid A. Qureshi and last updated on May 11, 2026. It contains the parameters for Mesh 3, selected from a sensitivity test conducted on Spine Model C at a 0º angle and 0.2 m/s inlet velocity.

Use Cases

• Validate mesh independence for CFD simulations based on the described sensitivity test.
• Apply the selected 'Finer' and 'Extra Fine' mesh parameters to similar spine model simulations.
• Compare computational intensity across different mesh configurations for anatomical models.

Strengths

• Parameters are based on a specific, computationally intensive simulation condition (0.2 m/s inlet velocity at 0º angle).
• The selected mesh configuration is explicitly defined with 'Finer' and 'Extra Fine' boundary settings.
• License is clearly stated as CC-BY-4.0, allowing for open reuse.

Limitations

• Column-level documentation is absent; field semantics must be inferred after download.
• Row count is unknown, which may limit suitability assessment.
• The dataset is very small (10.0 KB), indicating limited scope.

Provenance

Source

Zaid A. Qureshi via figshare.

Collection Method

Generated from a mesh sensitivity test for a computational fluid dynamics simulation.

Freshness

Last updated 2026-05-11 17:33:08; freshness should be verified.