Sensefly eBee Drone Imagery and DSMs of Casey and Wilkes

Imagery of Casey and Wilkes was captured by a Sensefly eBee drone on 19 and 20 December 2015, flying at approximately 120 metres above ground level. A mosaic and Digital Surface Model (DSM) of each area was created from the imagery using Pix4D software. The flights were conducted as a demonstration to test capability, and the data should not be used for anything other than a demonstration.

Use Cases

• Test photogrammetry software performance based on drone imagery mosaics.
• Demonstrate Digital Surface Model (DSM) generation workflows based on drone-captured imagery.
• Evaluate georeferencing accuracy of drone products based on imagery captured without ground control points.

Strengths

• Imagery captured at approximately 120 metres above ground level, providing high-resolution detail.
• Products include both imagery mosaics and Digital Surface Models (DSMs) for each area.
• Data products have a defined spatial reference: UTM zone 49S, WGS84.

Limitations

• No ground control points were used for georeferencing, limiting positional accuracy.
• The data is explicitly intended only for demonstration purposes.
• Last updated 2015-12-20 23:59:59.999000; freshness should be verified.

Provenance

Source

AU_AADC

Collection Method

Imagery captured by Sensefly eBee drone and processed with Pix4D software.

Time Range

19 and 20 December 2015

Freshness

Last updated 2015-12-20 23:59:59.999000

Geography

Casey and Wilkes