SoE2020: Construction and Demolition Waste Recovery in Australia, 2014-2019

Australian data on the amount of construction and demolition waste recovered or recycled, published by the Queensland Department of Environment, Science and Innovation. The amount recovered increased by 59% between 2014–15 and 2018–19, rising from about 1.81 million tonnes to about 2.87 million tonnes.

Use Cases

• Analyze trends in construction and demolition waste recovery based on the reported tonnage figures.
• Calculate recycling rates or diversion from landfill based on the reported waste recovery data.
• Model the growth of waste recovery infrastructure based on the 59% increase over five years.
• Benchmark regional or national waste performance based on the reported time-series data.

Strengths

• Specific tonnage figures are provided for two time points (1.81 million tonnes in 2014–15 and 2.87 million tonnes in 2018–19).
• Clear percentage change (59% increase) is stated for the five-year period.
• Data is published under an open CC-BY-4.0 license.

Limitations

• Column-level documentation is absent; field semantics must be inferred after download.
• Row count is unknown, which may limit suitability assessment.
• Data may reflect geographic or temporal bias inherent to data_gov_au.

Provenance

Source

[email protected], Queensland Department of Environment, Tourism, Science and Innovation.

Time Range

2014–15 to 2018–19

Freshness

Last updated 2026-05-27 14:09:05.837552; freshness should be verified.

Geography

Australia (likely Queensland or national scope)