Porous Titanium Structures for Biomedical Implants with Controlled Pore Characteristics

An experimental study by Santiago Marcelo Cantero investigates a gel-casting and sintering manufacturing process for porous titanium structures. The work produced samples with acrylic resin weight fractions ranging from 3% to 21%, resulting in pore fractions from 11% to 91% and pore sizes from 3 µm to 195 µm. This dataset likely contains measurements from these samples, detailing the relationship between manufacturing parameters and resulting material properties.

Use Cases

• Modeling the relationship between acrylic resin weight fraction and resulting pore fraction based on the described experimental mixes.
• Predicting pore size distribution in titanium structures based on manufacturing parameters from the gel-casting process.
• Optimizing implant material design for specific biomedical applications by selecting pore characteristics as described in the study.

Strengths

• Experimental data covers a wide range of pore fractions (11% to 91%) and pore sizes (3 µm to 195 µm).
• Systematic variation of a key manufacturing parameter with seven distinct acrylic resin weight fractions (3%, 6%, 9%, 12%, 15%, 18%, 21%).
• Research is focused on a specific, application-driven goal for biomedical implants.

Limitations

• Row count is unknown, which may limit suitability assessment.
• Column-level documentation is absent; field semantics must be inferred after download.
• Last update date is unknown; freshness unverified.

Provenance

Source

Santiago Marcelo Cantero via paperswithcode

Collection Method

Experimental data from a powder metallurgy technique based on gel-casting and sintering.