UKCCSRC Call 2: High-Pressure Two-Phase CO2 Flow Metering Data

From 19th May to 3rd June 2016, data was collected on a high-pressure test rig at North China Electric Power University. It contains gas-liquid two-phase CO2 flow measurements from a vertical Coriolis meter and a differential pressure transmitter. The data was produced under the UKCCSRC Call 2 project grant UKCCSRC-C2-218 and is hosted by the British Geological Survey.

Use Cases

• Validate Coriolis meter performance for two-phase CO2 flow based on the described experimental setup.
• Develop statistical data fusion models for mass flow measurement based on multi-modal sensing data.
• Analyze differential pressure signals in vertical two-phase CO2 flows based on DP transmitter data.
• Benchmark computational fluid dynamics (CFD) simulations against high-pressure experimental flow data.

Strengths

• Data collected under controlled high-pressure conditions up to 72 bar.
• Experimental period is precisely defined from 19th May to 3rd June 2016.
• Linked to published peer-reviewed research papers with provided DOIs.

Limitations

• Column-level documentation is absent; field semantics must be inferred after download.
• Row count is unknown, which may limit suitability assessment.
• Data may reflect the specific experimental conditions and sensor setup of the single test rig.

Provenance

Source

British Geological Survey (BGS)

Collection Method

Collected on a 1-inch bore, high-pressure CO2 flow test rig using a vertical Coriolis meter and a DP transmitter.

Time Range

19th May to 3rd June 2016

Freshness

Last updated 2026-04 09 08:28:27.155937; freshness should be verified.

Geography

Data collected at North China Electric Power University (NCEPU).