Loading...
Loading...
Electricity generation/consumption, renewable energy, smart grid, oil/gas, carbon emissions
4,065 datasets
Geoscience Australia conducted a multi-disciplinary study of the Browse Basin offshore Northwest Australia, analyzing seven Cretaceous supersequences from the late Tithonian to Maastrichtian. The study integrated updated biostratigraphy, seismic stratal geometry, facies interpretations, and geochemical analyses to identify three main Cretaceous stratigraphic play types and four Mesozoic petroleum systems. The regional deposition of Permo-Carboniferous, Triassic, Jurassic, and Cenozoic successions was mapped to constrain the burial history model.
Samphire Marsh No. 1 Well was drilled to a total depth of 6,664 feet as a stratigraphic and structural test. The detailed log describes the thickness and composition of geological layers, including Quaternary, Mesozoic, Permian, and Lower Ordovician formations, and confirms the depth to Precambrian granite. This dataset is provided by Geoscience Australia and was last updated in April 2026.
The Netherlands' signalling map indicates the percentage of natural gas pipes classified as 'to be replaced' at the neighborhood level, using CBS Wijk and Buurtkaart boundaries. The dataset, provided by the Ministerie van Binnenlandse Zaken en Koninkrijksrelaties, categorizes pipes based on materials such as asbestos cement and grey cast iron that have been collectively agreed for removal. It includes a specific list of materials, such as AC, GGIJ, and various PE types created for 1978, that are flagged for replacement.
A Dutch geospatial stock containing observed soil disturbances within a monitoring landscape. The data is laid down for four landscape elements within the theme of relief: Wierden, old dikes, ash, and geological values. It was created by the Ministry of the Interior and Kingdom Relations based on a comparison of the AHN2 and AHN3 elevation models, recording the type and purpose of each disturbance.
Drenthe province in the Netherlands was assessed for the applicability of horizontal closed-loop geothermal systems. The selection of areas was based on a points rating system with a maximum achievable score of 9. The data originates from a 2002 report titled 'Possibilities for underground energy storage in the province of Drenthe', project number 9M2460, commissioned by the Province of Drenthe.
A map layer shows emergency locations for soil remediation adopted by the Provincial Staten van Drenthe on 2 July 2014. These sites present risks to humans or the environment due to soil contamination and were targeted for reorganization or control by 2020. The policy framework is outlined in the note 'Making home soil' and forms the basis for tackling soil quality.
34 natural gas samples from the onshore and offshore Perth Basin, Australia, analyzed for molecular composition and carbon and hydrogen isotopic signatures. The dataset extends a previous study and provides evidence for Jurassic to Permian gas systems. It is provided by Geoscience Australia Data and was last updated in 2026.
NOAA Ship GORDON GUNTER collected these oceanographic measurements in the Gulf of Mexico from June 15-25, 2010, directly in response to the Deepwater Horizon oil spill. Raw Acoustic Doppler Current Profiler (ADCP) data provides unprocessed U- and V-component current vectors and suspended material distribution, while CTD data includes conductivity, temperature, dissolved oxygen, salinity, and water density. The dataset also contains real-time analysis products like charts, maps, and GIS files created for decision support during the spill response.
A study demonstrating how soil greenhouse gas emissions respond to global change drivers through additive, synergistic, and antagonistic interactions. The dataset is 463.3 KB in size, authored by Ding, and was last updated on 2026-05-21. It is shared under a CC-BY-4.0 license on the figshare platform.
NASA's TIMED SEE instrument provides modeled solar extreme ultraviolet (XUV) irradiance data from 0 to 40 nm. The Level 4 data product uses CHIANTI spectral models scaled to photometer signals to generate estimates at 0.1 nm spectral resolution, with daily, orbit, and 1-minute average files available. The integrated XUV irradiance has an estimated accuracy of 30%, and the spectral distribution below 27 nm is derived from models rather than direct measurements.
Van Allen Probe A Electric Field and Waves Suite (EFW) Burst Mode 1 provides targeted measurements of 3-D electric fields, 3-D wave magnetic fields, and spacecraft potential at 512 samples per second. The dataset includes components in spacecraft spin coordinates and is produced by the National Aeronautics and Space Administration. Burst Mode 1 data collection and playback are requested on the ground.
The Van Allen Probe B Electric Field and Waves Suite provides targeted measurements of 3-D electric fields, 3-D wave magnetic fields, and spacecraft potential during brief intervals. Burst Mode 1 data includes three electric field components, six spacecraft-sensor potential components, and three AC magnetic field components from the EMFISIS Search Coil Magnetometer, sampled at 512 samples per second. Data is provided in spacecraft spin coordinates by NASA.
350 parts per million absolute accuracy characterizes the Total Solar Irradiance (TSI) measurements in this final mission dataset. The TCTE3TSID product provides daily averaged solar constant data, normalized to 1 AU, collected by the Total Irradiance Monitor from December 2013 to June 2019. It serves as a calibration bridge and record of incident sunlight variability for Earth's atmosphere.
Geoscience Australia's Oracle organic geochemical database comprises analytical results for samples relevant to petroleum exploration, including source rocks, crude oils and natural gases collected across the Australian continent. The data are produced by a wide range of analytical techniques, such as programmed pyrolysis, gas chromatography, and mass spectrometry. Sample data originate from industry submissions under legislation, geological surveys by Geoscience Australia and state organizations, and open file publications.
Geochemical data delineates petroleum systems in the Northern Bonaparte Basin offshore Northern Australia. The study focuses on wells located on and between the Laminaria and Flamingo highs, covering northeastern Ashmore and Cartier Islands and western Zone of Co-operation Area A. Data likely originates from a 2000 journal publication by Preston and Edwards.
A 9.6 MB thesis dataset from figshare presents a coordinated protection system for a large-scale wind farm integrated into a modified IEEE 9-bus power system. The system uses eighteen Vestas V117-4.2 MW wind turbine generator units and is modeled with RTDS and RSCAD FX software. The author, Yongama Gcelu, validated the IEC 61850-based scheme via hardware-in-the-loop testing, with results confirming improved fault detection speed and communication latency.
4,413 city-level units are covered in this carbon emissions panel dataset spanning two decades from 2000 to 2020. It was constructed using a top-down allocation framework anchored to EDGAR provincial totals and integrating proxies like impervious surfaces and nighttime lights. The work was supported by the Lee Kuan Yew School of Public Policy, National University of Singapore.
Australia's petroleum wells database, now combined into the Geoscience Australia Borehole Database, provides header, biostratigraphy, organic geochemistry, reservoir, facies, stratigraphy, velocity, and directional survey data. Scientific data entry is generally conducted for offshore wells, while onshore data is acquired from state geological surveys. The dataset was retired and superseded in June 2023.
12,300 feet was the total depth drilled for the Geltwood Beach No. 1 Well in the Otway Basin, South Australia. The well was drilled between August 22 and November 10, 1963, by Drilling Contractors (Australia) Pty Ltd for Beach Petroleum No Liability, with a full program of logging, testing, and coring. It was plugged and abandoned as a dry hole after tests yielded only gas-cut salty water and drilling mud.
The Bonaparte Basin in northwestern Australia is the focus of this geochemical study. It uses isotopic and biomarker analyses of Mesozoic oils to characterize oil families within the Westralian Petroleum Supersystem. The research was presented at the 2000 AAPG International Conference and Exhibition in Bali.