Experimental Parameters for Compression Molding of Recycled Wood-Plastic Composites

An experimental methodology determines optimal process parameters for manufacturing wood-plastic composite materials via compression molding. The research uses recovered capirona wood and recycled polypropylene, evaluating parameters through standardized tests on molded samples. The author is Walter Tupia, and the dataset is sourced from paperswithcode.

Use Cases

• Optimizing sintering temperature and time for composite materials based on the described methodology.
• Analyzing the effect of wood particle content and size on material properties.
• Benchmarking material performance using standardized tests mentioned in the description.
• Developing process models for compression molding of recycled thermoplastic and wood composites.

Strengths

• The methodology provides specific, experimentally determined parameters: 50 minutes at 190°C, 30% wood and 70% polypropylene by volume, and wood particle sizes between 0.98 mm and 1.90 mm.
• The dataset is derived from a structured experimental process involving material characterization and standardized testing.

Limitations

• Row count is unknown, which may limit suitability assessment.
• Column-level documentation is absent; field semantics must be inferred after download.
• Last update date is unknown; freshness unverified.

Provenance

Source

paperswithcode

Collection Method

Experimental methodology involving material characterization and compression-molding tests.