Loading...
Loading...
Materials properties, battery data, semiconductor, alloys, polymers, additive manufacturing
816 datasets
A 1996 dataset from the Australian Antarctic Data Centre measures atmospheric corrosion rates across Antarctica and subantarctic islands. It contains observations from ten continental locations and four island sites, utilizing exposed standard steel coupons. The project was initiated to address unexpected corrosion at historic sites and to test hypotheses about corrosion in extreme cold.
From January 14 to February 18, 1988, this dataset records minute-interval variations of magnetic field components at seven sites on Kerguelen Island. It contains measurements of the North, East, and Vertical magnetic elements in NanoTesla, recorded by a three-component fluxgate magnetometer. The data was collected by the Bureau central de Magnetisme Terrestre (France) and the Australian Antarctic Data Centre.
Antarctic geological data from the Royal Society Range and Dry Valleys region includes nearly 600 paleocurrent measurements and 21 measured stratigraphic sections from the New Mountain Sandstone. The dataset, created by SCIOPS, results from field studies to determine depositional environment, sediment transport direction, and unit age. Data collection was completed and last updated in 1975.
Research from 2011 investigates the Southern McMurdo Ice Shelf's structure, composition, and motion. The project uses surface mapping from aerial photographs and satellite imagery, ground-penetrating radar surveys, GPS stake monitoring, and ice core analysis. It was conducted by SCIOPS to develop a model for sediment entrainment and ice shelf moraine formation.
Experimental data evaluates alternative discharge methods for damaged lithium-ion batteries to enable safe transport and critical mineral recovery. The project tests iron sulfate, sodium bicarbonate, magnesium chloride, sodium hydroxide, and sugar solutions as readily available alternatives to corrosive sodium chloride. The U.S. Environmental Protection Agency conducted the study to assess discharge effectiveness and environmental impacts.
1999 data from the Semiconductor Industry Association's ITRS roadmap identifies a need for transport and thermal constants. This database provides measured properties, including heat capacity, thermal conductivity, viscosity, and virial coefficients, for gases used in chemical vapor deposition and mass flow controller calibration. The data supports equipment modeling and calibration research.
Experimental data from a study analyzing the tensile strength of woven fabric samples cut in bias directions. The dataset examines how strength and failure mechanisms vary with bias angle, sample width, and length. It was authored by Ning Pan and published in 2020.
Data from 2009 characterizes the microstructure of ice cores from Siple Dome A between depths of 640 meters and 790 meters. The dataset likely contains pole figures and misorientation angle distributions for polycrystalline ice grains. It was provided by AMD_USAPDC and focuses on both a-axis and c-axis orientations.
Fieldwork established a stratigraphic succession through the thickest portion of the Lower Paleozoic Bowers Group in Antarctica. The investigation collected rock and fossil samples for paleontological and radiometric dating to determine depositional environment and geological history. The dataset was produced by SCIOPS and last updated in 1975.
A 1989 field study by SCIOPS examined the depositional setting of Devonian Beacon rocks across south Victoria Land. The investigation focused on paleoenvironment, paleoslope, basin shape, and sediment provenance, combining field measurements with computer modeling. Fieldwork included stratigraphic sections, paleocurrent directions, facies interpretation, and trace fossil distribution in the Darwin Mountains, Cook Mountains, Britannia Range, and Convoy Range-Allan Hills area.
Laying out experimental data on a bio-based dithiolane ink for light-based 3D printing, analyzed across macro and microscale fabrication techniques. The work demonstrates the material's printability and controlled thermal depolymerisation, representing a novel, sustainable alternative to (meth)acrylate-based inks.
Experimental data from 2020 details the synthesis and characterization of magnesium ferrite nanoparticles with diameters around 25 nm and superparamagnetic behavior. The dataset includes measurements for producing aqueous and solid magnetoliposomes below 130 nm, with curcumin encapsulation efficiencies above 89%. Results from FRET and fluorescence quenching assays demonstrate interactions with model biological membranes, pointing to applications in combined magnetic hyperthermia and chemotherapy.
A dataset from Texas Data Repository Harvested Dataverse presents a novel aerosol-assisted deposition technique for self-assembling nano and microparticle monolayers. The method achieves a monolayer self-assembly rate of 268 cm² min⁻¹ from a single source, representing a 93× increase over prior methods. The dataset, authored by Edward Yu and last updated in October 2025, includes insights into the physical mechanism and fabrication of ordered arrays from particles of various sizes, materials, and surface functionalities.
A structured bibliography and catalyst parameter database compiled from a review article on scorpionate-based catalytic systems. The dataset organizes references with author comments and includes separate tabs detailing catalyst activity, temperature, and load parameters. Author Luis F. Sánchez-Barba published this collection via e-cienciaDatos Harvested Dataverse in October 2025.
Aggregating experimental results from an 8-week in vivo study evaluating a tobramycin-loaded antibiotic-eluting bone void filler (ABVF) in a rabbit radial defect model challenged with Staphylococcus aureus. The study used histological, microbiological, and radiographic methods to assess infection prevention and bone response. The research was conducted by Benjamin D. Brooks and published in 2020.
DPAL is an annotated library of peer-reviewed research in materials science, created by the National Institute of Standards and Technology. It aims to fill a knowledge gap and redesign systematic literature searches for materials design questions. The library was last updated in July 2025.
A dataset of 50 robot control episodes created using LeRobot. It contains 24,263 total frames across 100 videos, recorded at 30 frames per second. The dataset was authored by 00ri and last updated on March 26, 2025.
From March 21 to June 7, 2007, the U.S. Army Corps of Engineers collected wave and current data in Kuhio Bay, Hilo, Hawaii. Data were gathered at three fixed locations using bottom-mounted Acoustic Doppler Current Profilers (ADCPs). The dataset is archived by NOAA's National Centers for Environmental Information (NCEI).
Experimental data from the fabrication and characterization of nanoporous BiVO4/TiO2/Ti heterojunction films for photoelectrochemical water splitting. The dataset includes measurements from films prepared at five different electrodeposition times (10, 30, 100, 500, and 1000 seconds). It contains results from morphological, crystallographic, and photoelectrochemical analyses, including photocurrent density and charge transfer resistance.
This dataset contains experimental data from a study on manufacturing and characterizing in-plane fiber-waviness defects in composite coupons. The data supports the development and validation of computational models for composite structures. It includes measurements from ultrasound, digital image correlation, and a novel residual strain inspection technique.