Loading...
Loading...
Materials properties, battery data, semiconductor, alloys, polymers, additive manufacturing
813 datasets
Conceptual geomorphic models derived from aerial photographs and satellite images can assist environmental managers. The dataset, provided by the Australian Ocean Data Network, was last updated on 2026-04-28. It is designed to help ascertain the significance of issues like sediment trapping efficiency and habitat change for clastic coastal environments.
Four block polymers with poly(cis-4,1-isoprene) (PI) contents ranging from 0 to 36 wt % delineate a trade-off between separation performance and mechanical robustness in membranes. The dataset likely contains bulk mechanical testing results and membrane performance metrics for specimens with an overall number-average molecular weight of Mn ≈ 100 kDa. It was authored by Adam Mann and harvested by the Texas Data Repository.
Polymers are designed for photodetectors. The dataset is 5.4 MB in size and includes CSV and SAV file formats. It was authored by Sumaira Naeem and last updated on May 11, 2026.
122 citizen scientists and 18 experts performed complexometric titrations to measure drinking water hardness. The study compares the accuracy and precision of citizen-collected data against expert results, validating a laboratory method for citizen science projects. The dataset was published by Jan E. Kath in 2026.
A marine multi-channel seismic reflection survey comprising 2900 km of data acquired off southeast Queensland in December 1989. The Bureau of Mineral Resources conducted the research cruise to investigate the structure, stratigraphy, and petroleum potential of the Capricorn and northern Tasman Basins. The survey included ties to the Aquarius-1 and Capricorn-1A wells and collected sonobuoy refraction, gravity, magnetic, and bathymetric data.
An extended abstract from the 2021 APPEA Conference analyzes the upper Permian to Lower Triassic sedimentary succession in the southern Bonaparte Basin. The study focuses on the timing, distribution, and depositional environments of formations across the Petrel Sub-basin and Londonderry High. It was published in The APPEA Journal on 2 July 2021.
1.3 MB of source and supplementary data supporting a manuscript on increasing fatigue resistance in ordered intermetallic alloys with multi-element symbiosis. The data, authored by Qian Li, is available in DOCX and XLSX formats under a CC-BY-4.0 license and was last updated on May 7, 2026.
Nematode assemblages data from the Creeksea estuary on the south east coast of the UK, collected in February 1999. The dataset includes presence and count data from field-collected bulk sediment samples and from laboratory microcosm experiments simulating dredged material deposition. Additional data on sediment granulometry and trace metal concentrations is also available.
Nematode assemblages data from the Creeksea estuary on the south east coast of the UK, collected in October 1998. The dataset includes presence and count data from field-collected bulk sediment samples and from laboratory microcosms simulating dredged material deposition. Additional data detailing sediment granulometry and trace metal concentrations is also available.
Near-infrared emission at 800 nm is achieved in transparent thin films of a copper(I) thiocyanate complex via an unconventional excited-state symmetry breaking mechanism. The dataset, published by Saran Waiprasoet on figshare in April 2026, contains structural and spectroscopic analyses supporting this finding. It documents a material with a large optical gap exceeding 3 eV and a Stokes shift of approximately 15,000 cm⁻¹.
37.5 KB of data on near-infrared photoluminescence from transparent thin films of a copper(I) thiocyanate complex. The dataset, authored by Saran Waiprasoet and last updated in April 2026, documents an unconventional route to achieving emission at 800 nm while preserving a wide optical gap greater than 3 eV.
A table listing protein designs and their corresponding experimentally determined crystal structures. The dataset, created by Hugh K. Haddox and updated in April 2026, is a 9.7 KB XLSX file. It references a GitHub repository containing the actual Protein Data Bank (PDB) files for each design model and its crystal structure.
4.2 MB of supplementary materials from a study on ligand-free magnetite nanoparticles prepared by electron beam physical vapor deposition. The dataset includes SEM images, TEM images with electron diffraction patterns, XRD spectra, and DLS summaries for nanocomposite solutions. It was authored by Stanislav Ye. Lytvyn and last updated on 2026-04-14.
A list of experimentally tested, recombinantly produced proteins includes optimization data for eight selected proteins. The dataset also compiles expression conditions for Klebsiella phage depolymerases from the literature. Aleksandra Otwinowska published this dataset on figshare in April 2026.
Networks of Materials is a dataset mapping the materials universe using network science concepts. The dataset, authored by Alexander Veremyev of the University of Central Florida, constructs networks from the AFLOW.org materials repository, where nodes represent materials and links indicate high similarity between their Density of States functions. The paper discusses the selection of similarity measures and analyzes the structural properties of these networks.
A 2026 study by Biplab Bhattacharjee presents a Taguchi L9 orthogonal array design of experiments for optimizing Fused Deposition Modelling parameters. The dataset explores three printing factors—layer thickness, infill density, and nozzle temperature—across three infill patterns to enhance the tensile strength of a wood-PLA composite. The optimized configuration achieved a maximum tensile strength of 46.41 MPa, representing a 28% improvement over non-optimized settings.
9 experimental configurations from a Taguchi L9 orthogonal array study optimize Fused Deposition Modelling parameters for Wood-PLA composites. The dataset details the effects of layer thickness, infill density, nozzle temperature, and infill pattern on tensile strength, with a reported maximum of 46.41 MPa. Authored by Biplab Bhattacharjee, this research provides a validated framework for sustainable additive manufacturing.
This dataset contains results from a Taguchi L9 orthogonal array experiment optimizing Fused Deposition Modelling parameters for wood-PLA composites. The study tested layer thickness (0.1, 0.2, 0.3 mm), infill density (25%, 50%, 75%), and nozzle temperature (190°C, 200°C, 210°C) across Triangular, Cubic, and Zig-zag infill patterns, reporting a maximum tensile strength of 46.41 MPa. Authored by Biplab Bhattacharjee and published in 2026, it provides a framework for sustainable 3D printing.
Proteomic data identifies interactions between polymerase κ (Pol κ) and DDX23, revealing their role in resolving R-loop structures to maintain genome stability. The dataset was generated by Feng Tang using proximity labeling and affinity pull-down coupled with LC-MS/MS analysis, and was last updated in April 2026. It is a 2.1 MB Excel file containing protein interaction profiles.
1.1 MB of data and Mathematica notebook supporting research on transcriptional bursting. The dataset was authored by Tetsuya Yamamoto and published on figshare under a CC-BY-4.0 license. It was last updated on May 8, 2026.